AT&T MG9150J manual Extensions

(p. 5-149) (p. 5-192)

(p. 5-4) (p. 5-4)

System Programming Quick Reference

Place the Programming Overlay on the dial pad of the system display phone at extension 10 or 11

TO START SYSTEM PROGRAMMING TO END SYSTEM PROGRAMMING

PRESS [ Feature ] [ 0 ] [ 0 ]	PRESS [ Feature ] [ 0 ] [ 0 ]
PRESS [ System Program ]	TO USE A SPECIFIC PROCEDURE
PRESS [ System Program ]	DIAL [ # ] and three-digit procedure code
	Example: [ # ] [ 1 ] [ 0 ] [ 1 ] for System
	Date

TO CYCLE THROUGH SYSTEM	TO CYCLE THROUGH AVAILABLE
PROGRAMMING PROCEDURES	SETTINGS
PRESS [ Next Procedure ] or [ Prev Procedure ]	PRESS [	Next Data	] or [	Prev Data	]
	TO RETURN TO FACTORY
NOTE: Procedures #399, #609,
and #728—shown below in dashed	SETTING
boxes—are skipped when cycling.	PRESS [ Remove ]

Extensions

LINE ASSIGNMENT
P+ >	R1.0	(p. 5-85)
PII >	R1.0	(p. 5-118)

DIAL #301

DIAL an extension number (10-33 P+, 10–57 PII)

To remove all existing line assignments, press [ Remove ] before selecting a line.

DIAL a line number (01–12 P+,01– 24 PII)

DIAL 1 = Assigned ✔ 2 = Not Assigned

3 = Select Button then press a programmable button (to assign the line to that button)P+ > R3.0, PII > R1.0

If you use option 3 after a line has been assigned, the line moves from the old button to the new button you select.

PRESS [ Next Item ] to program another line for this extension.

To program another extension:

PRESS [ Next Procedure ] [ Prev Procedure ],

enter a new extension num- ber, and repeat above steps

LINE ACCESS RESTRICTION

P+ >	R1.0	(p. 5-83)
PII >	R1.0	(p. 5-116)

DIAL #302

DIAL an extension number (10–33 P+,10-57 PII)

DIAL a line number (01–12 P+,01– 24 PII)

DIAL 1 = No Restriction ✔ 2 = Outgoing Only 3 = Incoming Only

4 = No Access (line appears on button, but you can use line only to pick up a transferred or held call)

PRESS [ Next Item ] to program another line

To program another extension:

PRESS [ Next Procedure ] [ Prev Procedure ] ,

enter a new extension num- ber, and repeat above steps

DISPLAY LANGUAGE
P+ >	R1.0	(p. 5-45)
PII >	R1.0	(p. 5-76)

DIAL #303

DIAL an extension number (10–33 P+, 10-57 PII)

DIAL 1 = English ✔ 2 = Spanish 3 = French

PRESS [ Next Item ] to program another extension

AUTOMATIC EXTENSION PRIVACY

P+ > R1.0		(p.	5-17)
PII >	R1.0	(p.	5-17)
DIAL	#304

DIAL an extension number (10–33 P+,10-57 PII)

DIAL 1 = Assigned

2 = Not Assigned ✔ PRESS [ Next Item ] to program another

extension

ABBREVIATED RINGING

P+ > R1.0

PII > R1.0

DIAL #305

DIAL an extension number (10–33 P+,10-57 PII)

DIAL 1 = Active (1 ring) ✔

2 = Not Active (repeated ringing)

PRESS [ Next Item ] to program another extension

TRANSFER RETURN

EXTENSION

P+ > R2.0

PII > R1.0 ≠ R 2 . 0

DIAL #306

DIAL an extension number (10–33 P+,10-57 PII)

DIAL number of the extension (10– 33 P+,10-57 PII) to which call should return if not answered

✔Extension transferring call

PRESS [ Next Item ] to program another extension

FORCED ACCOUNT CODE ENTRY

P+ > R3.0	(p.	5-58)
PII > R3.0	(p.	5-90)
DIAL #307

DIAL an extension number (10–33 P+,10-57 PII)

DIAL 1 = Assigned

2 = Not Assigned ✔

PRESS [ Next Item ] to program another extension

DISTINCTIVE RING
P+ > R3.0	(p.	5-46)
PII > R3.0	(p.	5-77)
DIAL #308

DIAL an extension number (10–33 P+,10-57 PII)

DIAL 1 = Active ✔ 2 = Not Active

PRESS [ Next Item ] to program another

extension

INTERCOM DIAL TONE

P+ >	R3.0	(p. 5-79)
PII >	R3.0	(p. 5-111)

DIAL #309

DIAL an extension number (10–33 P+,10-57 PII)

DIAL 1 = Regular ✔ 2 = Machine

PRESS [ Next Item ] to program another extension

AUTOMATIC VMS COVER

P+ > R3.1	(p.	5-20)
PII > R3.0	(p.	5-32)

DIAL #310

DIAL an extension number (10–33 P+,10-57 PII)

DIAL 1 = Assigned

2 = Not Assigned ✔

PRESS [ Next Item ] to program another extension

EXTERNAL HOTLINE

(was EMERGENCY TELEPHONE)

P+ > R3.1	(p.	5-55)
PII > R3.0	(p.	5-87)

DIAL #311

DIAL an extension number (10–33 P+,10-57 PII)

DIAL 1 = Assigned

2 = Not Assigned ✔ PRESS [ Next Item ] to program another

extension

VOICE INTERRUPT ON BUSY

P+ > R3.1	(p. 5-156)
PII > R3.1	(p. 5-200)

DIAL #312

DIAL an extension number (10–33 P+,10-57 PII)

DIAL 1		= Assigned
2		= Not Assigned ✔
PRESS [ Next Item ] to program
	another		extension
LINE ACCESS MODE
PII > R4.0				(p. 5-115)

DIAL #313

DIAL an extension number (10–57)

DIAL 1 = Pool ✔ all extensions except 10

2 = Key ✔ extension 10 only

POOL EXTENSION ASSIGNMENT

PII > R4.0		(p. 5-154)
DIAL	#314
DIAL	an extension number (10–57):
	To remove all existing pool
	assignments, press [ Remove ]
	before selecting a line.
DIAL	a pool access code (880,
	881, 882, or 883)
DIAL	1 = Assigned ✔ 880
	2 = Not Assigned ✔ 881,
	882, 883
	3 = Select Button then

press a programmable button (auxiliary pools only)

PRESS [ Next Item ] to program another pool for this extension.

To program another extension:

PRESS [ Next Procedure ] [ Prev Procedure ],

enter a new extension number, and repeat above steps

POOL ACCESS RESTRICTION

PII > R4.0	(p. 5-152)
DIAL #315

DIAL an extension number (10–57)

DIAL a pool number (880, 881, 882, or 883)

DIAL 1 = No Restriction ✔ 2 = Outgoing Only 3 = Incoming Only 4 = No Access

PRESS [ Next Item ] to program

another pool

To program another extension:

PRESS [ Next Procedure ] [ Prev Procedure ],

enter a new extension num- her, and repeat above steps

CALL WAITING
P+ >	R4.0	(p. 5-30)
PII >	R4.0	(p. 5-47)

DIAL #316

DIAL an extension number (10–33 P+,10-57 PII)

DIAL 1 = Assigned

2 = Not Assigned ✔

PRESS [ Next Item ] to program another extension

COPY SETTINGS
P+ >	R1.0	(p. 5-35)
PII >	R1.0	(p. 5-57)

DIAL #399

DIAL a source extension number DIAL target extension numbers

6