Installation
After you have plugged in your repeaters in the locations you think are best, place a call from a cordless handset (AT&T SB67108) and while talking, move around the building to test the reception. You may want to adjust the position of repeaters to receive the best reception.
Plug the small end of the power adapter into the power jack on the front of the repeater and route the cord through the slot on the bottom of the repeater.
Plug the large end of the power adapter into a standard electrical outlet not controlled by a wall switch.
Route the power adapter cord through the slot on the bottom of the repeater.
Plug the small end of the power adapter into the power jack on the bottom of the repeater.
Raise the antennas.
