WALL INSTALLATION
1Fill in directory card
Remove the directory card and write in your own telephone number. Also write the telephone numbers (or names) that you want to store in each memory location.
2Reverse handset tab
To install the telephone on a wall jack, you must reverse the small tab beneath the directory card. This tab holds the handset in place when you hang up.
Remove the directory card and plastic cover. Use a paper clip to lift and remove the handset tab. Reverse the tab and reinstall it as shown (Figure 1). Then replace the directory card and cover.
A
B
C
D
Figure 1
3 Plug the line cord into the jack on the underside of the base. Feed the line cord into the channel and wind it around the mounting area. Feed the last portion (as short as possible), through one of the slots in the mounting area (Figure 2).
Figure 2
2
