AT&T TL90078 user manual Searching for Base appears on my cordless handset

Appendix B

Troubleshooting

The handset screen shows

PRESS HNDST LOC 4 SEC ON BASE and the handset is out of the telephone base or charger.

•Unplug the battery from the handset and plug it back in (pages 8-9). The screen should now show NOT REGISTERED and you can follow the registration instructions on page 11.

SEARCHING FOR BASE appears on my cordless handset.

•Ensure that the telephone base is powered up.

•Place the cordless handset in the telephone base for one minute to allow the cordless handset and base to resynchronize channels.

•Move the cordless handset closer to the telephone base. You might have moved out of range.

•Reset the telephone base. Unplug the unit’s electrical power. Wait for 15 seconds then plug it back in. Allow up to one minute for the cordless handset and telephone base to reset.

•Other electronic products can cause interference with your cordless phone. Try installing your phone as far away from these types of electronic devices as possible: television sets, VCRs, or other cordless telephones.

16