INSTALLATION
∙If you are using the USB port, it is not necessary to turn off your computer before plugging the mouse into the USB port on your computer or into a USB hub. If you are using the PS/2 port, you must first shut down your operating system and turn off your computer before plugging the mouse into the PS/2 port on your computer. Also make sure you disconnect any mouse that is currently connected to the PS/2 port or to the serial port.
∙Locate the USB or PS/2 port on your computer. A USB port is a flat rectangular port. A PS/2 port is a round
∙Plug the mouse connector into the USB port on the computer, or plug the mouse connector into the USB- PS/2 adapter and then plug the adapter into the PS/2 port on the computer. Make sure the orientation of the connector is correct – do not force the connector into the port.
∙Please note that the Super Mini™ Optical Mouse does not work with a serial (DB9) port and Atek does not support the use of active signal converters such as
6
