Chapter 4. OSD Operation
F7 SCAN:
Clicking the F7 field or pressing [F7] invokes Auto Scan mode. This function allows you to automatically switch among the available computers at regular intervals so that you can monitor their activity without having to take the trouble of switching yourself.
The selection of computers to be included for Auto Scanning is made with the Scan/Skip mode setting under the F3 SET function (see page 27).
The amount of time that each Port displays for is set with the Scan Duration setting under the F3 SET function (see page 27). When you want to stop at a particular location, press the [Spacebar] to stop scanning.
If the scanning stops on an empty port, or one where the computer is attached but is powered Off, the monitor screen will be blank, and the mouse and keyboard will have no effect. After the Scan Duration time is up, the Scan function will move on to the next port.
As each computer is accessed, an S appears in front of the Port ID display to indicate that it is being accessed under Auto Scan mode.
While Auto Scan mode is in effect, the console will not function normally. You must exit Auto Scan mode in order to regain control of the console.
While you are in Auto Scan mode, you can pause the scanning in order to keep the focus on a particular computer either by pressing P, or with a Left Click of the mouse. See Invoking Auto Scan, page 17, for details.
To exit Auto Scan mode, press the [Spacebar] or [Esc].
33