ATEN Technology ACS1216A manual F3 SET:

ACS1208A / ACS1216A User Manual

F3 SET:

This function allows the Administrator and each User to set up his own working environment. A separate profile for each is stored by the OSD and is activated according to the Username that was provided during Login.

To change a setting:

1.Double Click it; or move the highlight bar to it, then press [Enter].

2.After you select an item, a submenu with further choices appears. To make a selection, either Double Click it; or move the highlight bar to it, then press [Enter]. An icon appears before the selected choice to indicate which one it is. The settings are explained in the following table:

Setting	Function
OSD HOTKEY	Selects which Hotkey activates the OSD function:
	[Scroll Lock] [Scroll Lock] or [Ctrl] [Ctrl].
	Since the Ctrl key combination may conflict with programs running
	on the computers, the default is the Scroll Lock combination.
PORT ID	Allows you to position where the Port ID appears on the screen.
DISPLAY	The default is the upper right corner, but you can choose to have it
POSITION	appear anywhere on the screen.
	Use the Mouse or the Arrow Keys plus Pg Up, Pg Dn, Home, End,
	and 5 (on the numeric keypad with Num Lock off), to position the
	Port ID display, then Double Click or press [Enter] to lock the
	position and return to the Set submenu.
	Note: The ID display position for each port on the installation is set
	independently; the choice specified here only applies to the
	currently active computer.
PORT ID	Determines how long a Port ID displays on the monitor after a port
DISPLAY	change has taken place. The choices are: User Defined - which
DURATION	lets you select the amount of time (from 1 - 255 sec.); and Always
	On - which displays the Port ID at all times. If you select User
	Defined, key in the number of seconds, then press [Enter]. The
	default is 3 Seconds. A setting of 0 (zero) disables this function.

(Continues on next page.)

26