Hotkey Operation

Firmware Upgrade Mode

To set the CS-1762 / CS-1764 to Firmware Upgrade Mode, do the following:

1.Invoke HSM (see p. 16).

2.Key in: upgrade

3.Press [Enter].

The front panel LEDs flash to indicate Firmware Upgrade Mode is in effect.

Note: To exit Firmware Upgrade Mode, you must power off the switch.

Restore Default Settings

To reset the CS-1762 / CS-1764 to its default hotkey settings, do the following:

1.Invoke HSM (see p. 16).

2.Press [R] [Enter].

All hotkey settings return to the factory default settings. See p. 29 for a list of default settings.

HSM Summary Table

After invoking HSM (see p. 16), key in one of the following keys to perform the corresponding function:

Key

Function

H

Toggles between the default and alternate HSM invocation keys.

 

 

T

Toggles between the default and alternate Port Switching keys.

 

 

F2

Sets the Mac keyboard operating platform.

 

 

F10

Auto detects the keyboard operating platfrom. (PC Compatibles)

 

 

F4

Lists the current hotkey settings via the Paste function of a text editor

 

or WP.

 

 

F5

Performs a USB reset.

 

 

B

Toggles the beeper On and Off.

 

 

X [Enter]

Enables/Disables the Port Switching keys.

 

 

R [Enter]

Resets the hotkey settings to their default status.

 

 

upgrade [Enter]

Invokes Firmware Upgrade Mode

 

 

 

 

 

19

2004-06-04