Installation

1.Make sure that power to all the devices you will be

connecting up have been turned off. You must unplug the power cords of any computers that have the Keyboard Power On function. Otherwise, the switch will receive power from the computer.

2.To prevent damage to your installation due to ground potential difference, make sure that all devices on the installation are properly grounded.

Preparation

The CS-72M can either lay flat on the desktop or stand upright. To have it stand upright, place it in the mounting stand. Make sure that the long end of the stand is to the rear.

To keep the unit from sliding around or scratching the desktop, attach the silicone mounting pads that have been included with this package to the bottom panel of the switch, or the bottom of the mounting stand. The circular depressions show you where the pads should go.

- 6 -

2003-08-01

Page 8
Image 8
ATEN Technology CS-72M user manual Installation, Preparation