1. Introduction
Components
Front View
1 & 2
3 4
No. | Component | Description |
|
|
|
1 | Port Selection | Press a pushbutton for longer than two seconds to bring the |
| Pushbuttons | KVM, USB, and audio focus to the computer attached to its |
|
| corresponding port. |
|
| Press a pushbutton for less than two seconds to bring only |
|
| the KVM focus to the computer attached to its corresponding |
|
| port. |
|
| Press pushbuttons 1 and 2 simultaneously for 2 seconds to |
|
| start Auto Scan Mode. See Auto Scanning, page 13. |
|
|
|
2 | Port LEDs | The Port LEDs are built into the Port Selection Pushbuttons. |
|
| The upper ones are the KVM Port LEDs; the lower ones are |
|
| the USB LEDs: |
|
| KVM |
|
| Lights DIM ORANGE to indicate that the computer attached |
|
| to the corresponding port is up and running (On Line). |
|
| Changes to BRIGHT ORANGE to indicate that the computer |
|
| attached to its corresponding port is the one that has the |
|
| KVM focus (Selected). |
|
| Flashes to indicate that the computer attached to its |
|
| corresponding port is being accessed under Auto Scan |
|
| mode. |
|
| USB |
|
| Lights GREEN to indicate that there is a USB cable |
|
| connection to the computer attached to its corresponding |
|
| port. |
|
| Changes to BRIGHT GREEN to indicate that the computer |
|
| attached to its corresponding port is the one that has access |
|
| to the USB peripherals. |
|
|
|
3 | Console Ports (Audio) | Your speakers and microphone plug in here. |
|
|
|
4 | USB 2.0 Peripheral | USB 2.0 peripherals (printers, scanners, etc.) can plug into |
| Port | this port. |
|
|
|
5