CS72D / CS74D User Manual

Mouse Port-switching

The Mouse Port-switching function can be enabled or disabled. The default setting is disabled. To enable, do the following:

1.Invoke HSM (see page 13).

2.Press [W] or [w] [Enter].

This procedure is a toggle. Repeat to disable.

Note: The feature is only supported when mouse emulation is enabled. See Mouse Emulation Control, above.

Power On Detection

With the Power On Detection feature, the switch automatically switches to the next powered-on computer if one computer is powered off. This feature is enabled by default. To disable Power On Detection, do the following:

1.Invoke HSM (see page 13).

2.Press [E] or [e].

This procedure is a toggle. Repeat to enable.

Keyboard Operating Platform

The CS72D / CS74D’s default port configuration is for a PC compatible keyboard operating platform. If your console uses a PC compatible keyboard and you have a Mac attached to a port, for example, you can change the port’s keyboard operating platform configuration so that the PC compatible keyboard emulates the Mac keyboard. The procedure is as follows:

1.Bring the KVM focus to the port you want to set.

2.Invoke HSM (see page 13)

3.Press and release the appropriate Function key (see table below). After completing this procedure, you automatically exit HSM.

(Continues on next page.)

16