ATEN Technology CS72D, CS74D Upgrade Succeeded, Upgrade Failed, Port, Finish

6. The Firmware Upgrade Utility

Upgrade Succeeded

After the upgrade has completed, a screen appears to inform you that the procedure was successful:

Click Finish to close the Firmware Upgrade Utility.

After a successful completion, the CS72D / CS74D exits Firmware Upgrade Mode, and resets itself.

Upgrade Failed

If the Upgrade Succeeded screen doesn’t appear, it means that the upgrade failed to complete successfully, in which case you should do the following:

1.Power off the CS72D / CS74D by removing the power jack.

2.Invoke Firmware Upgrade Mode by holding down the front panel Port 1 pushbutton (see page 23) and power on the CS72D / CS74D. Check the front panel LEDs – see page 24 for LED behavior details.

3.Do the firmware upgrade procedure again.

27