ATEN Technology CS9134, CS9138 OSD, Hotkey Port Selection

CS9134 / CS9138 User Manual

Hotkey Port Selection

Port Selection:

To select a port with the hotkey method, do the following:

1.Press [Ctrl] [Shift] [Alt] to invoke the hotkey function.

2.Key in the Port ID number (see page 19), then press [Enter].

Auto Scanning:

ŠTo invoke auto scanning with the hotkey method, do the following:

1.Press [Ctrl] [Shift] [Alt] to invoke the hotkey function.

2.Key in 0 (zero), then press [Enter].

ŠTo exit scan mode, press the [Spacebar]. Scan mode stops and the KVM focus stays on the port that had the focus when scan mode stopped.

Note: 1. Press the keys in sequence - one key at a time. First [Ctrl], then [Shift], then [Alt].

2.After invoking the hotkey function with the [Ctrl] [Shift] [Alt] combination, you must key in the Port ID and press [Enter] within 1 second for each keypress.

OSD

OSD (On Screen Display), provides a menu driven interface to handle the computer switching procedure. OSD operation is discussed in detail beginning on page 21.

18