InstallationInstallation
3
Installation in a KVM setup:
Before installing your G-CV160, please make sure
your Macintosh is powered OFF.
1) Connect the PC keyboard and mouse ports
on the G-CV160 to one of the PC ports on
your KVM switch. Be sure the keyboard port
on the KVM switch is connected to the key-
board port on the G-CV160, and the same is
true for the mouse ports.
2) If you have an older Macintosh with DB-15
(Mac video) connectors, connect the PC
video port on the G-CV160 to the correspond-
ing video port on your KVM switch. If you're
connecting the G-CV160 to a new G3, G4 or
other Macintosh with HDB-15 video connec-
tors, you can bypass the video portion of the
G-CV160 and connect the video port on your
KVM switch directly to the Mac.
3) Connect the Mac ports on the G-CV160 to
your Macintosh computer.
4) If you have any extra ADB devices (beside
the typical mouse and keyboard), connect
them to the 2nd ADB port on the side of the
G-CV160.