KH2508 / KH2516 User Manual

Restoring Original Factory Default Settings

You can restore the original factory default settings for the KH2508 / KH2516 Cat 5 KVM Switch. The original password for the default administrator account is restored; all administrator and user accounts are removed from the system. Only the station name and date and time are retained. This procedure requires the use of a jumper cap.

1.Turn off the KH2508 / KH2516 and unplug the power cord.

2.Remove the cover of the KH2508 / KH2516.

3.Place a jumper cap over pins 1-2 of the J11 jumper on the mainboard.

4.Plug in the power cord and turn on the KH2508 / KH2516. The following directions appear on the console screen:

USERNAME AND PASSWORD INFORMATION AND PORT/USER INFORMATION HAS BEEN CLEARED. PLEASE POWER OFF THE SWITCH, REMOVE THE JUMPER, CLOSE THE CASE, THEN RESTART.

5.Turn off the KH2508 / KH2516 and unplug the power cord.

6.Remove the jumper cap from pins 1-2 of the J11 jumper.

7.Replace the cover on the KH2508 / KH2516. Plug in the power cord and turn on the KH2508 / KH2516.

8.You should now use the default username and password to login to the OSD.

82