ATEN Technology KL1100 Console Selection, Port ID Numbering & Port Selection, Note:, [Alt], [Ctrl], [Shift], [Ctrl] [Alt] [Shift]

KL1100 User Manual

Console Selection

Console selection on the KL1100 is accomplished with hotkey combinations, as described in the following table:

Combination	Action
[Ctrl] [Alt] [Shift] [P] [C] [Enter]	to select normal mode (pc, etc.).
[Ctrl] [Alt] [Shift] [S] [U] [N] [Enter]	to select SUN
[Ctrl] [Alt] [Shift]	Activates the Firmware Upgrade Mode.

[u][p] [g] [r] [a] [d] [e] [Enter] Note: this Hotkey sequence only works when the Firmware Upgrade Recovery Switch (see page 26) is in the Normal position.

[Ctrl] [Alt] [Shift] [L] [Enter]	Enable Local (LCD) console;
	Disable Remote (external) console.
[Ctrl] [Alt] [Shift] [R] [Enter]	Enable Remote (external) console
	Disable Local (LCD) console.
[Ctrl] [Alt] [Shift] [L] [R] [Enter] or	Enable both consoles (default).
[Ctrl] [Alt] [Shift] [R] [L] [Enter]

Note: 1. Press the keys in sequence - one key at a time. First [Ctrl], then [Alt], then [Shift], etc.

2.Console selections are not saved. If the KL1100 is powered off, it reverts to the default setting of both consoles enabled when it is powered on again.

3.If the KVM switch connected to the KL1100 uses the [Ctrl] [Alt] [Shift] combination to invoke its hotkey mode, you won't be able to access any of its hotkey operations because the KL1100 will capture the combination for console selection first.

Port ID Numbering & Port Selection

Port ID numbering and Port Selection follow the method used by the KVM switch connected to the KL1100. Consult your KVM switch's User Manual for details.

24