Chapter 2. Hardware Setup
To rack mount the KL1100, do the following:
1.While one person positions the KL1100 in the rack and holds it in place, the second person loosely screws the front brackets to the rack.
2.While the first person still holds the KL1100 in place, the second person slides the L brackets into the KL1100's side mounting brackets from the rear until the bracket flanges contact the rack, then screws the L brackets to the rack.
3. After the L brackets have been secured, tighten the front bracket screws.
Note: Allow at least 5.1 cm on each side for proper ventilation, and at least 12.7 cm at the back for the power cord and cable clearance.
13