Chapter 7. Real COM Port Management
3. Click OK to complete the operation.
Note: 1. If a range of ports was selected, and Map consecutively is enabled, the COM ports are mapped to the Target ports in sequence based on the port numbers.
2.Only Virtual Mode ports are mapped. Other ports in the range are passed over.
Port Unmapping
To unmap virtual COM ports:
1.Either click Unmap… on the button bar or select Unmap… from the menu to bring up the Port Unmapping dialog box:
2.Drop down the list of mapped COM ports and select the COM port you wish to unmap.
3.Click OK to complete the operation.
Note: For a consecutive unmapping, the COM ports are unmapped in sequence based on the mapped COM port number.
79