Peripheral Installation
1.After you have finished the software installation procedures for your operating system and have connected the UC-232A to your computer, connect the peripheral device to the UC- 232A, and then turn the peripheral on.
2.Follow the Installation Wizard's on-screen instructions to complete the installation.
Note: 1. This procedure only occurs the first time you connect the peripheral. If your peripheral was previously connected and configured for the RS-232 (COM) port, after you perform the Adapter Installation and click Finish, the driver will detect it and install it automatically. However, some peripheral devices, such as older PDAs, require that you re-install the software for the peripheral device before it will work properly.
2.Under Windows 2000, if you connect a modem, you must specify it as a Standard Modem.
