Source Device Selection

The VS0801 8-port Video Switch offers easy and flexible source device selection with either the front panel pushbuttons, with the remote control, or through the RS-232 serial interface.

Note: Whenever the VS0801 is powered on, it automatically selects the first port. You may choose one of the methods outlined below to select a different port.

Manual Selection

To select a source device, press the pushbutton that corresponds to the port it is connected to.

Note: The SELECTED LED (green) light indicates which port is currently selected.

Remote Control Selection

To select a source device with the remote control, press the number button that corresponds to the port it is connected to.

Alternatively, you may also cycle through the source devices by pushing the Port Up and Port Down buttons on the remote control unit.

ŠUse the Port Up button to select the next port in ascending order (from left to right on the front view panel).

ŠUse the Port Down button to select the next port in descending order (from right to left on the front view panel).

Note: Aim the remote control unit at the IR receiver located on the front panel of the VS0801. For optimum performance, make sure there is a clear line-of-sight between the remote control unit and the IR receiver.

- 13 -