Source Device Selection

The VS481 HDMI switch offers easy and flexible source device selection either with the front panel pushbuttons, or with the remote control.

Note: Whenever the VS481 HDMI switch is powered on, it automatically selects port 1. You may choose one of the two methods listed below to select a different port.

Manual Selection

To select a source device, press the pushbutton that corresponds to the port it is connected to.

The fourth HDMI input port is located on the front of the switch.

Note: The SELECTED LED (green) light indicates which port is currently selected.

Remote Control Selection

To select a source device with a remote control, press the number button that corresponds to the port it is connected to.

Alternatively, you may also cycle through the available source devices by pushing the Port Up and Port Down buttons on the remote control unit.

ŠUse the Port Up button to select the next available port in an ascending order (from left to right on the front view panel).

ŠUse the Port Down button to select the next available port in a descending order (from right to left on the front view panel).

Note: 1. The maximum range of the remote control unit is 10 meters (30 feet).

2.Aim the remote control unit at the IR receiver located on the front panel of the HDMI Switch. For optimum performance, make sure there is a clear line-of-sight between the remote control unit and the IR receiver.

- 10 -