Hardware Installation
Before you Begin
1.Ensure that all equipment to be connected is powered off.
2.Make sure that all devices you will be connecting up are properly grounded.
3.Unplug the power cords of all the computers that have the Keyboard Power On function.
Installation of this HDMI switch is simply a matter of plugging in the appropriate cables.
To install the switch, refer to the installation diagram on the next page as you perform the following three steps:
1.Use a HDMI cable to connect the HDMI input port on the video display device to the HDMI output port on the rear of the switch.
2.Use HDMI cables to connect the HDMI output ports on the source device(s) to the HDMI input ports on the switch. The fourth HDMI input port is located on the front of the switch.
3.Plug the provided power adapter into an appropriate AC power source; plug the power adapter cable into the Power Jack on the HDMI Switch.
This completes the installation. You may now turn on the display and source devices.
- 8 -