3

Installing the Remote Wonder™ Plus

Adding the Remote Wonder™ Plus to your system does not require any special tools. To install the Remote Wonder™ Plus follow the instructions below.

To install your Remote Wonder™ Plus

1Open the battery container on the back of the Remote Wonder™ Plus and insert two AAA batteries.

2Insert the included ATI Installation CD into your CD-ROM drive.

3Click the Remote Wonder™ icon on the ATI CD Install screen. Follow the on-screen instructions, and then allow the computer to restart.

4Plug the remote receiver into any available USB port on your computer. The Remote Wonder™ Plus icon will appear on the Windows taskbar. Your Remote Wonder™ Plus is ready to use!

The Remote Wonder™ Plus operates at 433 MHz. The Remote Wonder™ Plus range depends upon the environment. For best results, the receiver should be placed as far as possible from the computer’s case and monitor.

For optimum long-range performance, tilt the Remote

Wonder™ Plus up approximatley 30 degrees.