ATI Technologies 550 To install software PowerCinema, Select SETUP.EXE from the X\PCM\SETUP.EXE

THEATER 550.book Page 9 Friday, January 21, 2005 9:31 AM

To install software (PowerCinema)

1Run the SETUP utility again.

If your CD-ROM auto-run is not enable or the SETUP utility does not start automatically:

a)Click the Start button in the task bar.

b)Click Run.

c)Select SETUP.EXE from the X:\PCM\SETUP.EXE

(where X is the drive letter of your CD-ROM drive)

d)Click OK.

2Click Install PowerCinema under Software Install

3Follow on screen instruction and Click Next to complete the installation

Note: You can find CD-key on the CD jacket.

* PowerCinema or other software are optional bundle for this product.

9