29
Starting Windows® with TV Display Enabled
The TV screen may become scrambled during the
initial Windows® logo display. This is only a
temporary effect and your screen will be restored
within a few seconds.
During start up, your RADEON 7000 64MB AGP
will go through a sequence of mode settings, during
which your TV display will remain blank. This
process takes only a few seconds and helps program
the TV display.
Using SCART Connectors for European TVs
The above illustration shows how to connect your PC
to a European TV using the SCART.
The SCART connector supports only the Composite
video format, which means you will have to use an
S-Video-to-Composite Video Adapter Cable.
If your European TV does support S-Video (S-VHS)
input, you should use an S-Video cable (available in
most consumer electronic stores) rather than the
SCART connector.
How To Enable/Disable The TV Display
1Access the Windows® Control Panel. Double-
click Display.
2Click on the Settings tab and then the
Advanced... button.
Audio In(Right = red)
(Left = white)
SCART
CONNECTOR
Audio Cable
Video Adapter Cable
Connect to PC
Audio Out
Connect to PC
S-Video Out
Connect to
TV or VCR
Composite Video-In (yellow)