5
Display Configurations

The following table lists the different ways you can

connect displays to your card.

Display
Configuration Connector(s) Used Comments
One CRT
display
VGA connector OR DVI-I
connector with DVI-I-to-
VGA adapter*
CRT- cathode ray tube
analog display
One DFP
display DVI-I connector DFP - digital flat panel
display
One TV TV Output
Cards with S-Video out also
support Composite out via
an S-Video-to-Composite
adapter*. Cards with
Composite out DO NOT
support connection to TVs
with S-Video Input.
CRT display +
TV VGA connector +
TV Output
Unsupported configuration
if the CRT display is
attached to the DVI-I
connector via a DVI-I-to-
VGA adapter*
DFP display +
TV DVI-I connector +
TV Output
CRT display +
DFP display VGA connector + DVI-I
connector
CRT display +
CRT display
VGA connector + DVI-I
connector with DVI-I-to-
VGA adapter*
The DVI-I connector can
support a CRT display
using a DVI-I-to-VGA
adapter*
CRT display +
DFP display +
TV
VGA connector + DVI-I
connector + TV Output
The TV display will “clone”
the image of one of the
other two displays.
CRT display +
CRT display +
TV
UNSUPPORTED
CONFIGURATION
*point to www.ati.com for purchase