ATI Technologies X800 Detailed Installation, Quick Installation, CHAPTER 2:, Installation Steps, Installing Hardware, ATISETUP, Start > Run > X:\ATISETUP.EXE, (where, CD-ROM, drive)

• Run through the automatic ATISETUP utility; or

• Start > Run > X:\ATISETUP.EXE (where X is the drive letter of your CD-ROM drive).

Detailed Installation

The following instructions will take you step by step through the installation of your new All-in-Wonder® X800 PCI Express®.

Reassemble and connect your computer system.

Install your new All-in-Wonder® X800 PCI Express® card.

Remove any previously installed card.

Shut down and disconnect your computer system.

2

3

4

5

6 Install the All-in-Wonder® X800 PCI Express® drivers and configuration software from the ATI Installation CD-ROM by doing one of the following:

Uninstall the drivers and software for your old graphics card.

If you are using a motherboard containing an on-board graphics solution and do not intend to use it as part of a multiple monitor display, disable it.

1

CHAPTER 2:

Installing Hardware

This chapter will guide you through the physical installation of your All-in- Wonder® X800 PCI Express® card.

Quick Installation

For experienced users and system administrators, follow these brief instructions for installing your All-in-Wonder® X800 PCI Express® card in the shortest possible time.

Installation Steps

Quick Installation 5