34

Connections and Adapters for the All-in-Wonder® X800 PCI Express® Card

XStandard VGA Monitor Connector. To connect a VGA monitor to the DVI-I connector, plug the supplied DVI-I-to-VGA adapter into the DVI-I connector, then plug your monitor cable into the adapter.

YDVI-I-to-VGA Adapter (if necessary).

ZDVI-I Backplate Connection. To connect a flat panel, plug the monitor’s DVI-I connector directly into the DVI-I connection.

[Honda/VGA adapter (included): To connect a second VGA monitor, plug the second monitor into the VGA connection on the Honda/VGA adapter.

\Honda backplate adapter connection: To enable a second monitor and provide a connection for TV (S-Video), plug the Honda/VGA adapter into the Honda backplate connection.

To connect your monitors1Turn off your computer and monitors.2Plug the monitor cables into their appropriate connectors.

3Turn on your monitors first, and then restart your computer so that Windows® can detect the new hardware settings.

4When the New Hardware Found Wizard appears, at the appropriate prompt insert the ATI Installation CD to load the drivers for your All-in- Wonder® X800 PCI Express® card.

To set up a multi-monitor display1From the Start menu click Control Panel, then Display. Click theSettings tab to access the basic multi-monitor configuration settings.

Note: ATI software provides many additional configuration features that can be accessed by clicking the Advanced button from the Display Properties > Settings tab.

2Select the Monitor icon identified by the number 2.