Atlantic Technology 374 SR, Home Theater System Atlantic Technology, Connection, PBM Subwoofer

Models 371 LR, 373 C, and 374 SR Atlantic Technology®

372 PBM Subwoofer

■High output level reproduces full dynamic impact.

■Smooth in-room response down to 20Hz.

A Word About Digital Surround Technologies and THX

Connection

Figure 1: Gold plated

5-way binding posts. Accepts up to 10 guage bare wire

It is important to remember that THX technologies work in conjunction with whatever processing technology it is paired. THX, on its own, is not a decoder or processor. It enhances and adapts the surround sound processor it is paired with to more accurately reproduce movie soundtracks in the home environment.

The new digital surround technologies, such as Dolby Digital® (AC-3®) and DTS®, offer dramatic improvements in channel separation and dynamic range over conventional multi-channel analog matrix formats such as Dolby Surround® and Dolby Pro Logic®. THX sound systems, with their outstanding dynamic, spatial, and tonal performance, are ideally suited to convey the benefits of digital multi-channel formats. THX technologies will continue to be essential for the accurate reproduction of all multi-channel sources, both now, and in the future.

We recommend that you connect your new System 370 THX speaker components using high quality wire of 16 gauge or larger. There are many respected manufacturers in the audio industry that specialize in speaker wire and interconnect cables who make suitable products for your new system. We recommend that you consult your local audio/video specialist for more specific information.

Warning: To prevent risk of electrical shock or damage to your equipment, always unplug all component AC cords before proceeding with speaker and component connections! The last step in wiring your system is plugging in the AC cords!

You can connect your System 370 THX speakers by using a variety of connectors, or by removing 1/2" of insulation from each wire end, twisting the strands of wire together, placing the wire through one of the post holes and screwing down the nut tightly. We recommend that you check your local electrical codes to make sure you are not using an improper connector.

It is important to observe polarity while making speaker connections: red (+) terminals on the amplifier to red (+) on the speaker, black (-) on the amplifier to black (-) on the speaker. Look carefully at the wires you are using and note that one of the wires in each pair is marked by either a different color, printing, ridges, or a thread inter- twined with the wire strands. By convention, the marked wire is connected to the red (+) terminal.

Whether your are connecting a complete System 370 THX, or adding one speaker or subwoofer to your present system, the wiring should usually look like the diagram in Figure 2. When installing an Atlantic Technology subwoofer into your system, refer to the subwoofer’s instruction manual for other wiring options. Before turning on the amplifier, be certain that no stray wire strands are touching across the two terminals as this might damage your amplifier.

3