Atlantic Technology ICTS-6.1 installation instructions Installation Instructions, Specifications

ICTS-6.1-IP

Ceiling Speakers

™

Installation Instructions

Thank you for purchasing Atlantic Technology speaker products. These high quality 2-way speakers solve a myriad of surround sound and distributed audio installation problems. We work very hard to ensure that all of our speakers consistently deliver exceptional performance and value.

We hope you enjoy them to their fullest. Please take a moment to read these instructions so you can get the most from your speakers.

Mounting Specifications

These speakers are intended for mounting in a ceiling,in material rang- ing from ½ inch to 1 inch thick.They require at least 4 5⁄8 inches of depth as measured from the front surface of the ceiling .The cutout opening for the ICTS-6.1 is 7 3⁄8 inches in diameter (3 11⁄16 inches radius). These speakers will work equally as well in a wall as in a ceiling; however note that they require more mounting depth than is normally available in a 2x4 studded wall.

Mounting Locations

Generally, it’s best to keep the speaker at least 24 inches away from any nearby wall boundaries (wall/corner), since placing any speaker in close proximity to other boundary surfaces will artificially reinforce the upper bass/lower midrange sound, adversely “coloring” the sound that the speaker produces.

The ICTS-6.1’s 1-inch dome tweeter is mounted in a pivoting housing, so it to can be directed precisely towards the listening area for best sound.

Specifications

Dimensions	8 9⁄16” (220 mm)
Cutout Dimensions	7 3⁄8” (188 mm)
Mounting Depth (from front surface of ceiling)	4 5⁄8” (118 mm)
New Construction Bracket (optional)	IC-NC-6.1
In-ceiling Back Box (optional)	IC-BOX-6/8
Frequency Response	59-20kHz +/- 3dB
Sensitivity	88dB 1Watt/1 Meter
Recommended Amplifier Power	10-100 Watts RMS
Impedance	6 ohms
Woofer	6 ½” Polypropylene cone
Tweeter	1” Pivoting soft dome
Net Weight	4.6 Lbs (2.1 kg)

Model ICTS-6.1

When painting the grille...

1. Remove Scrim

2. Paint Grille

3. Reapply Scrim