2 | Safety Precautions |
Table of Contents
2 Model
2 Important Considerations Before Installation
2Recommended Wire Sizes
3Location Considerations
4Connecting the
4To Connect as a Powered Subwoofer
4To Connect as a Passive Bass Module
5Mounting the
5 Installation of the
5 Installation of the
Model IWTS-28 SUB
In-Wall Subwoofer
Thank you for purchasing Atlantic Technology products. Our speaker sys- tems have been designed to deliver exceptional sound and value.We hope you like what you hear from them, and are happy with your decision to buy them.
5Removing and Installing the Grille
5Treating the Wall Cavity
5Cutting the Opening
6Installing the Mounting Frame
6 Painting the Speaker Assembly
6 Speaker Connection and Assembly
6Installing the Speaker Enclosure Into the Frame
7Front Panel Controls
7
7IR Knockout
7 Specifications
For Future Reference
Record your serial numbers and date of purchase here:
Model Number
Serial Number
Date of Purchase
The serial number is found on the back panel.
Please take a few moments to read these instructions.They’re intended not only to tell you how to mount the speakers, but how to get the best perfor- mance from them.
Important Considerations Before Installation
Recommended Wire Sizes
The longer the wire run, the heavier the wire should be. Use the following recommendations as a guide for your installation. And if you’re in doubt, remember that it never hurts to get the next heavier grade of wire.Also note that lower gauge numbers equal heavier wire sizes.
Wire Run Wire Gauge:
<15 ft. 16 ga.
15 to 30 ft. 14 ga. >30 to 50 ft. 12 ga.
Copyright © 2008 Atlantic Technology International.
Specifications are those in effect at the time of printing. Atlantic Technology reserves the right to change specifications or designs at any time without notice.
