Wireless
1.7.1 IP Adress
This section describes the configuration required by LAN- attached PCs that communicate with the Wireless Multi- Function Access Point, either to configure the device or for network access. These PCs must have an Ethernet interface (or wireless adapter) installed properly, be connected to the Wireless
Please follow the steps below for PC’s network environment installation. First of all, please check your PC’s network components. The TCP/IP protocol stack and Ethernet network adapter must be installed. If not, please refer to MS Windows related manuals.
1.8 Default Settings
Before configurating this Wireless
User:
Password:
IP address (192.168.1.100) Subnet Mask(255.255.255.0) Wireless: Access Point SSSID: default Channel:6