NetCamera NV
Address of the IP Security Night Vision Camera is within the same subnet as your workstation.
Click “Start”, “Setting”, “Control Panel”, and the “Network” icon. Select TCP/IP from the “Network” dialog box and from the “TCP/IP Properties” dialog box click “Specify an IP address”.
If the IP Security Night Vision Camera is situated on a different subnet than your workstation, you will not be able to set the IP address from this workstation. To verify make sure the first 3 sections of the IP address of the IP Security Night Vision Camera corresponds to the first 3 sections of the workstation. Therefore the IP address of the IP Security Night Vision Camera must be set from a workstation on the same subnet.
Question | I cannot access the IP Security Night Vision Camera from |
| a web browser. |
|
|
Answer | Other possible problems might be due to the network cable. |
| Try replacing your network cable. Test the network interface |
| of the product by connecting a local computer to the unit, |
| utilizing a standard Crossover (hub to hub) Cable. If the |
| problem is not solved the IP Security Night Vision Camera |
| might be faulty. |
|
|
Question | Why does the Power LED not light up constantly? |
|
|
Answer | The power supply used might be at fault. Confirm that you are |
| using the provided power supply DC 5V for the IP Security |
| Night Vision Camera and verify that the power supply is well |
| connected. |
|
|