NetCamera NV
| Question |
| Why does the Link LED not light up properly? | |
|
|
|
|
|
| Answer |
| • | There might be a problem with the network cable. |
|
|
|
| To confirm that the cables are working, PING the |
|
|
|
| address of a know device on the network. If the |
|
|
|
| cabling is OK and your network is reachable, you |
|
|
|
| should receive a reply similar to the following |
|
|
|
| (…bytes = 32 time = 2 ms). |
|
|
| • | The network device utilized by the IP Security |
|
|
|
| Night Vision Camera is not functioning properly |
such as hubs or switches. Confirm the power for the devices are well connected and functioning.
Question | Why does | the IP Security Night Vision Camera work |
| locally but not externally? | |
|
|
|
Answer | • | Might be caused from the firewall protection. Need |
|
| to check the Internet firewall with your system |
|
| administrator. |
| • | The default router setting might be a possible |
|
| reason. Need to double check if the configuration |
|
| of the default router settings is required. |
|
|
|
Question | There is bad focus on the IP Security Night Vision |
| Camera, what should be done? |
|
|
Answer | You need to adjust the IP Security Night Vision Camera focus |
| manually as described in Adjust IP Security Night Vision |
| Camera Focus. |
|
|