ENGLISH

4RESET Press this button for 10 seconds to restore factory default setting.

1.4 Default Settings

Before you configure the NetServer Pro, you need to know the following default settings:

ƒPassword:

ƒUsername:

ƒIP address : 192.168.0.1

1.5Cabling

Follow these steps for a trouble-free start of the print server operations with your print server.

1.Confirm proper operation of the printer to be connected to the print server.

2.When you have confirmed proper operation of the printer, turn off its power.

3.Confirm that your network is operating normally.

4.Connect the print server to the network (through the RJ-45 connector of the print server or IEEE 802.11g wireless interface).

Configuration problems may result if the print server is powered up without first establishing its network connection. Please follow this procedure to avoid complications at the configuration stage.

5.While the printer is powered off, plug the print server to the printer (USB interface).

6.Turn on the printer’s power.

24