Kenwood TS-590S manual Double Function Keys and Hold Time Selection, 4 Power-onMessage

5 SOFTWARE: ENHANCING OPERATING PLEASURE

5.4 Double Function Keys and Hold Time Selection

Just like the TS-480S, TS-590S employs double function keys to activate different functions by holding down a key. This is meant to make operation easier than in the system requiring one to push a function key first before hitting another key to invoke the desired function.

Since for most of the keys, functions related to the original functions of the keys are assigned, they can be used intuitively.

Examples: NB key and variable NB level, the NOTCH key and NOTCH WIDTH selection, etc.

Additionally, the hold time to activate another function can be switched in three stages. By default about 0.5 seconds is selected, but you can switch between about 0.2 seconds, and about 1 second as necessary.

5.5 Mode Selection of Built-in Electronic Keyer

The transceivers in the previous generations were equipped with an electronic keyer in which dots and dashes are always memorized for output. On the TS-590S, we have employed an electronic keyer which allows a user to select either of the conventional keyers, which is called “Mode B”, or a newly adopted “Mode A” which has different memory timings. If you experience the problem of producing an extra dot or dash in “Mode B”, try “Mode A” and you may find you are able to send more accurately with greater ease.

5.6Switchover of Shift Frequency Interlocked with Change of Pitch Frequency

On the transceivers in the previous generations, after a user chose and set a pitch frequency, they then manually changed the shift frequency, but on the TS-590S, when the pitch frequency is changed on the menu, the shift frequency is also altered accordingly.

5.7 Power-on Message

The transceiver can be configured to display a maximum of 8 characters (alphanumeric characters and some symbols) on the 13-segment display on the right side of the display screen during the powerup. As the factory default, the string “KENWOOD” is set to be displayed.

Figure 5-4 Power-on Message

TS-590S CONTENTS

41