Sennheiser SK 5212 manual Slide the

After switch-on

After switch-on, the standard display is shown on the LC display panel . Depending on the setting, the transmission frequency, the channel number or the name of the transmitter is displayed.

Displaying the menu settings in display mode

In display mode, and with the lock mode activated, you can display the current menu settings one after the other (see “Overview of the operating menu” on page 19). After a few seconds, the display returns to the standard display.

SET

DOWN UP

Slide the	multi-function switch		to the
position	(UP) or	(DOWN) to display the

menu settings. If you slide the multi-function switch repeatedly to the same position, all menu settings are displayed one after the other.

Changing to the selection mode

To change from display mode to selection mode, you have to deactivate the lock mode.

Deactivate the lock mode as described in the chapter “Deactivating the autolock function temporarily” on page 14. You can now select the menu whose settings you want to adjust.

Press the multi-function switch			(switch position	SET) to change to
the menu that was displayed in display mode.
Selecting a menu
	SET	Slide the multi-function switch		to the position
DOWN	UP	(UP) or	(DOWN).
		Press the	multi-function switch		(switch
		position SET).
		The name of the selected menu starts flashing.

16