Sennheiser SK 5212 manual Activating/deactivating the automatic lock mode, Lock

Loading the factory pre-set default settings – RESET

Via the “RESET” menu, you can load the factory pre-set default settings. After the reset, the standard display is shown on the LC display panel.

Low-cut frequency	flat
Microphone sensitivity	0 dB
Name	SK5212
Standard display	frequency
Autolock function	deactivated
Channel	FIX 01
Output power	high

Frequencies in the channel bank “VAR” are reset.

Activating/deactivating the automatic lock mode –

LOCK

The transmitter has an autolock function (automatic lock mode) that can be activated or deactivated via the “LOCK” menu. When the autolock function is activated, the lock mode is automatically activated 10 seconds after pressing the last button. The lock mode protects the transmitter from accidental programming.

SET

DOWN UP

RF

RF

In the selection mode of the “LOCK” menu, press the multi-function switch (switch position

SET).

The current setting of the autolock function is displayed.

Change the setting by sliding the multi- function switch to the position (UP) or

(DOWN).

Select “LOC.ON” to activate the autolock func- tion or select “LOC.OFF” to deactivate the auto- lock function.

Store your setting by pressing the multi- function switch (switch position SET).

25