Sennheiser SK 5212 manual Adjusting the microphone sensitivity - ATTEN

Adjusting the microphone sensitivity – ATTEN

Via the “ATTEN” menu, you can adjust the transmitter’s sensitivity.

RF AF

dB

The sensitivity is correctly adjusted when the level display for audio signal “AF” shows full deflection only during the loudest passages or when the redLED lights up brightly.

The sensitivity can be adjusted in 1-dB steps from +40 dB to –30 dB.

Note:

!The bargraph has a resolution of approx. 3 dB per segment with a display range of 45 dB.

Adjusting the bass roll-off frequency – LOWCUT

To reduce unwanted low-frequency noise such as wind and handling noise, you can activate a low-cut filter. The low-cut frequency is 120 Hz.

If you do not want to reduce low-frequency signal portions, select the set- ting “FLAT”.

Selecting the standard display – VIEW

Via the “VIEW ”menu, you can select one of the following standard displays:

RF RF RF

MHz	CH
	CH

Transmission	Channel	Name
frequency “FREQ”	“CHAN”	“NAME”

The selected standard display is shown

!after switch-on,

!after the menu settings have been displayed for 10 seconds in display mode.

24