8 EXPANSIVE APPLICATION SOFTWARE
ARHP-590 allows a user to check the operating status of ARHP-590 and TS-590S even after minimized. You can check the status of the power of the TS-590S (Power ON or Power OFF) and your connection and transmission statuses.
Figure 8-9 Checking the Operating Status
8.4.3 KNS (Kenwood Network Command System)
For details of Kenwood Network Command System, refer to 8.3.3. KNS (Kenwood Network Command System).
8.4.4 Disabling AF Gain Control from ARCP-590
ARHP-590 has a capability to disable the AF gain control from the ARCP-590. While AF gain is controlled from ARCP-590, the audio volume of the TS-590S may be adjusted in an unexpected way. Therefore, we have added a function to disable this control.
To enable this function, from the Tool pulldown menu, select “Setup” and click on the Prohibits control of AF gain from ARCP-590checkbox.
8.5 New ARUA-10 (USB Audio Controller) Freeware
We have released ARUA-10, the USB audio control software to allow the PC’s microphone and speaker to be used in place those of the TS-590S.
ARUA-10 is available free and can be downloaded from Kenwood’s website. URLs from which ARUA-10 can be downloaded: http://www.kenwood.com/i/products/info/amateur/software_download.html Refer also to “TS-590S USB Audio Setting Manual” on the Kenwood’s website.
Caution:
For USB audio, time delay is unavoidable due to its operating principle. Therefore, USB audio cannot be used for a latency- critical application (e.g. operations in a contest or pileup where a quick response is essential).
During the operation with KNS over a network connection, ARUA-10 is not required.
