Kenwood TS-590S manual Quick Memory Function, Cross Tone Function, PF Keys

5 SOFTWARE: ENHANCING OPERATING PLEASURE

5.8 Quick Memory Function

The TS-590S comes with a quick memory function as did with the previous transceivers. The number of channels is a maximum of 5 as default, but you can increase the number up to 10 by setting in the menu mode. Conversely, if you wish to decrease the number of channels to make the operation quicker, it is possible to limit the number to 3. You can also scan all the quick memory channels or erase the channels at one time.

Figure 5-5 [Q-M.IN]/[Q-MR] Key

5.9 Cross Tone Function

Among the functions newly employed in FM mode is the cross tone function. This function allows a user to set separately the encode tone frequency, which is added when CTCSS is transmitted, and the decode tone frequency added when CTCSS is received. This function is meant to be used when you use a repeater where tone frequencies of uplink and downlink are different.

5.10 PF Keys

The TS-590S incorporates two PF keys instead of the conventional one to enhance user convenience. Some functions can be assigned only to the PF keys, so as to use the PF keys as required by the operational circumstances.

Examples of functions that can be assigned only to the PF keys:

•DATA SEND function:

When modulating the signal using the ACC2 or USB audio input located on the transceiver’s rear panel, modulation signals other than those at these microphone connectors are muted, whereas there is no modulation with the audio input through the connectors on the rear panel if a transmission is made with the [SEND] key on the front panel. In such a case, it is convenient to assign DATA SEND function to the PF key.

•TX TUNE function:

A continuous carrier with a certain output level can be sent out regardless of the current settings of mode or transmit output level. This function is very convenient for tuning a screwdriver type antenna tuner or adjusting a linear amplifier.

As an alternative, you can assign a frequently-used menu or a function of a double-function button such as NR LEV to the PF key for a quick activation.

42

CONTENTS

TS-590S