Kenwood TS-590S manual Expansive Application Software

8 EXPANSIVE APPLICATION SOFTWARE

8.2.2 Controlling TS-590S from a PC using the USB Connector

The microphone connected to the TS-590S and the transceiver’s built-in speaker are used.

	PC		Type of	TS-590S
	Software	Hardware	Connection	Hardware
	Virtual COM port
Control signal	driver and	-	USB cable	* Connected to the USB connector
	ARCP-590
				The microphone connected to the
Audio signal	-	-	No connection	TS-590S and the transceiver’s built-in
				speaker

8.2.3Controlling TS-590S from a PC using the COM and ACC2 connectors (microphone and speaker connected to the PC to be used)

The microphone and speaker connected to a PC are used. The ACC2 connector is used for input/ output of the TS-590S’s audio signal.

		PC		Type of	TS-590S
	Software		Hardware	Connection	Hardware
Control signal	ARCP-590		-	RS-232C cable	* Connected to the COM connector
			The microphone
Audio signal	-		and speaker	Home-made	* Connected to the ACC2 connector
			connected to the	audio cable
			PC
Caution: To use the ACC2 connector for input/output of the audio signal, ARUA-10 is not required.

8.2.4Controlling TS-590S from a PC using the USB connector (microphone and speaker connected to the PC to be used)

The microphone and speaker connected to the PC are used. The USB connector is used for input/ output of the TS-590S’s audio signal.

		PC		Type of	TS-590S
	Software		Hardware	Connection	Hardware
	Virtual COM port
Control signal	driver and		-
	ARCP-590
				USB cable	* Connected to the USB connector
	Windows		The microphone
			and speaker
Audio signal	standard driver
			connected to a
	and ARUA-10
			PC

TS-590S

CONTENTS

53