NetServer Pro

1.Device List: Display the connected print server within the network.

2.Control Buttons: Setup Wizard, Change IP Address, Update

Firmware, Show Web Setup, Factory Reset, Print Test, Discover Device, About, and Close.

3.Information Field: Display the basic information of the selected print server in the Device List.

4.Status Bar: Display the system status.

Before you can print over the network using your print server, you may need to perform some basic setup tasks through PS-Utility. These settings include:

ƒChange the print server’s IP Address: clicking the Change IP Address button will bring up a dialog box that allows you to change the IP Address of selected print server.

ƒPerform web configuration: click the Show Web Setup button to open your web browser and launch the Configuration Utility; alternately, you can double-click the selected print server in the Device List to launch the Configuration Utility.

18