NetServer Pro

ƒSearch the available devices: click the Discover Device button to re-search the connected print server within the network.

ƒResume the default settings: click the Factory Reset button to reload the factory settings of NetServer Pro.

ƒUpdate Firmware: click the Update Firmware button to update the firmware of NetServer Pro.

1.9.3Setting Up Windows XP TCP/IP Printing

Following is the correct procedure for setting up TCP/IP LPR printing under Windows XP:

1.Click Start ->Printer and Faxes.

2.Double Click Add a Printer then click Next.

3.In the next windows, select Local Printer.

4.Create a new Standard TCP/IP Port then click Next.

5.Input the IP Address of NetServer Pro, and the Port name of the Port that will be printed to, then click Next.

6.In the next page Select Custom, and click Settings.

7.Select LPR, and put the Port name in the field labeled Queue Name. Then Click OK.

8.Click Next.

9.Click Finish

10.The Printer Install Wizard will now prompt for drivers. Select the correct Make and Model, or click Have Disk, to provide the Manufacturer’s Driver Disk.

19