ENGLISH
ADSL, if suitably connected, at first will be flashing and then it will remain fixed.
1.5 Default Settings
The WebShare 242W Wireless ADSL2+ Router can be configured with your Web browser. The web browser is included as a standard application in following operation
systems, UNIX, Linux, Mac OS, Windows 95/98/NT/2000/Me, etc. The product provides a very easy and
Before Configuration
This section describes the configuration required by LAN- attached PCs that communicate with the WebShare 242W Wireless ADSL2+ Router , either to configure the device, or for network access. These PCs must have an Ethernet interface installed properly, be connected to the WebShare 242W Wireless ADSL2+ Router either directly or through an external Switch, and have TCP/IP installed and configured to obtain an IP address through a DHCP server or a fixed IP address that must be in the same subnet of the WebShare 242W Wireless ADSL2+ Router . The default IP address of the WebShare 242W Wireless ADSL2+ Router is 192.168.1.254 and subnet mask is 255.255.255.0. The best and easy way is to configure the PC to get an IP address from the WebShare 242W Wireless ADSL2+ Router (DHCP client).
Please follow the steps below for PC’s network environment installation. First of all, please check your PC’s network components. The TCP/IP protocol stack and Ethernet network adapter must be installed. If not, please refer to MS Windows relative manuals.
Before you configure this WebShare 242W ADSL2+ Wireless Router, you need to know the following default settings:
•Username:admin
27