OnePower Line Interactive UPS (EN)
1.4 Placement
To prevent the risk of fire or electric shock, install in a temperature and humidity controlled indoor area, free of conductive contaminants.
∙This UPS system is designed for indoor use only.
∙Do not install the UPS under direct sunlight. Your warranty will be void if the batteries fail due to overheating.
∙Install in a temperature and humidity controlled indoor area
∙To eliminate any overheating of the UPS, keep all ventilation openings free from obstruction and do not place any foreign objects on top of the UPS. Keep the UPS 15 cm away from the wall.
1.5 Connect the loads
First, connect the UPS with the AC Mains, then plug the loads into the output connectors on the rear of the UPS. To use the UPS as a master “On/Off”switch, make sure that all of the loads are switch “On”.
Pag. 16 |