OnePower Line Interactive UPS (EN)

APPENDIX A: TROUBLE SHOOTING

If the UPS is not functioning properly, you can refer first to this chapter for simple troubleshooting before contacting your reseller. This could save you time and effort but if the problem persist, then consult your service provider.

A.1.1 UPS

The LED and the acoustic signals are a profit tool to individualize immediately possible problems

Situation

 

Check Items

Mains normal but

1.Is the power switch on?

Line (

) LED is

2.Check the Fuse?

not on.

 

 

 

3.Is the power cord loose?

 

 

 

 

 

 

 

 

 

 

Line

(

)

LED

1.Battery voltage is too low.

flashes

 

every

 

seconds

but

no

 

output.

 

 

 

 

 

 

 

 

 

Solution

1.Press Main Switch on.

2.Change fuse with same rating.

3.Re-connect the power cord properly.

1.Recharge the UPS for 24 hours.

Alarm

buzzer

1.Check the load status

 

1.Remove

some

uncritical

 

beeps

 

 

 

 

load.

 

 

 

continuously

and

 

 

 

 

 

 

Line (

) LED is

 

 

 

 

 

 

fixed

when Utility

 

 

 

 

 

 

is normal.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Alarm

buzzer

 

 

1. Remove

some

uncritical

 

beeps

for

10

 

 

load and re-switch on the

 

 

 

 

 

 

 

 

 

 

 

 

 

UPS.

 

 

 

seconds, then the

 

 

 

 

 

UPS is turned off.

 

 

 

 

 

 

 

 

 

 

 

No LEDs display

 

 

1. Contact Atlantis Land.

 

on the front panel

 

 

 

 

 

 

 

 

 

 

 

 

 

UPS

does

not

1.The UPS’s ba

 

1.Charge the battery.

 

 

provide expected

due to recent outage.

 

2.If the battery is near the end

 

backup time.

 

2.The UPS’s ba

 

of its service life, you have

 

 

 

 

the end of its service life.

 

to replace the battery.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

The UPS operates1.Building wiring error such1.Call a qualified electrician in

A03-P701 / A03-P551

Pag. 21