ENGLISH
OSD V. Position: | adjust OSD V. Position |
OSD Timer: | adjust OSD timer |
Translucent: | adjust OSD translucent |
Exit: | Return to main MENU |
3.6Other Function
Press ◄► button choice and MENU button to enter OSD menu
Volume: | adjust speaker volume |
Exit | Return to main MENU |
3.7EXIT
If you choose EXIT , press MENU button to exit main menu
4 Various
4.1Mounting the monitor
You can install the monitor onto a swing arm or other mounting fixture that is compliant with the VESA (Video Electronics Standards Association) standard.
Before mounting the monitor, you must remove the monitor from its base.
Remove the hinge cover by prying from the bottom part of the cover.
Remove four screws to detach the monitor from the base.
•To mount the monitor, follow the instructions supplied with the mounting fixture.
CAUTION: Use an UL listed VESA arm only, or it might result in malfunction and may cause damage to your monitor.
Please make sure the VESA arm or
4.2Tilting the Display
Caution:
•Do not touch the screen when you tilt the LCD.
•Do not tilt the LCD beyond the allowed angles when tilting forward or backward, or the LCD may fall or be damaged.
•Do not place your fingers on the front of the hinge
arm. Doing so may hurt your fingers when tilting. For viewing clarity, you can tilt the LCD forward (up to 3 degrees) or backward (up to 25 degrees).
4.3 Packing the Monitor
You need to tilt the monitor to the horizontal position when packing it into a carton.