ENGLISH
the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
•Reorient or relocate the receiving antenna.
•Increase the separation between the equipment and receiver.
•Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help.
2 Installing the Monitor
2.1Unpacking
Open the shipping cartons and check the contents.
If any items are missing or damaged, contact your dealer immediately.
The package should include the following items:
•TFT color monitor
•User's guide
•Power cord
•Signal cable
•DC power adapter
•Audio cable
2.2Making Connections
CAUTION:
•Ensure that the power to the monitor, the computer, and other connected devices is off before making any connections.
•When unplugging the connector, always hold the plug. Never pull on the cord.
1.The monitor, when taken out from the shipping carton, is in the horizontal position. Holding the base of the monitor with one hand and the rear center of the monitor in the other hand. Turn the panel up to the vertical position until you hear the base click into place.
2.Place the monitor on a flat surface in a
3.Connect the signal cable 1 to the
VGA port of the computer. Tighten the two thumbscrews by turning clock wise to ensure proper grounding.
4.Plug the DC cord of the AC adapter to the power connector 2, then plug the female end of the AC cord to the AC adapter and the male end to an electrical outlet socket
3.
5.Connect one end of the audio cable to the monitor's Audio Input connector and the other end to the Audio Output connector of the computer .
7 - 44 |