Atlantis Land 1000BASE-SX, 1000BASE-T, Rack Gigabit Switch Layer 2 manual Port 25 & Port, Rear Panel

PORT 25 & PORT 26

1000BASE-T Twisted Pair Ports (RJ-45) or 1000BASE-SX Fiber-Optic Ports (SC)

-These two RJ-45 ports are auto MDI-X ports: The Switch is equipped with two Gigabit twisted pair ports, the ports will auto negotiate 10/100/1000Mbps.

-The Switch is equipped with two Gigabit fiber-optic ports, the SC ports can connect to fiber networks on the other end with the same connector.

CONSOLE PORT

Attach a console cable to this console port at the left side of the front panel, and connect it to a workstation’s RS232. This will enable a console configuration from a remote terminal.

Rear Panel

AC Power Connector:

Attach the supplied power cord to this power connector and connect it to the power outlet.

Use the switch beside this power connector to turn on or turn off the power.

10